The 9 critical points to check you get the most out of your centrifugal disc finishing machine and process

Here are 9 critical points to help you get the most out of centrifugal disc finishing:

1. Regularly Check That You Have Enough Media In Your Machine.

2. Check That The Media Condition Is Good.

3. Check You Have The Right Amount Of Water And Compound In The Machine.

4. Regularly Check Your Seal Gap.

5. Too Many Parts In The Machine.Media in machine

6. Check The Machine Is Running The Correct Way.

7. Check The Machine Tub And Spinner Are In Good Condition.

8. Check You Are Following The Process Parameters.

9. Check Your Starting Condition Is The Same.

Leave a Reply