These machines are capable of cleaning and descaling complex welded fabricated components and constructions. They are designed specifically to clean wide head and base plates, ribs, re-enforcements along with the welded seams after construction.
All round blasting is achieved after 3D simulation and actual placement of the blast wheels in the optimum locations of the blast chamber. The chamber can be designed with 2 blast zones, each zone designed to blast clean the surface of the infeed side and the second, the outfeed side and end. As the fabrication passes through the chamber, all gussets, re-enforcements, ribs, angles are descaled and cleaned to Sa Swedish standards and with the desired profile to optimise the adhesion of the coating to be applied.
The equipment requires to easily meet the most stringent customer specifications regarding surface cleanliness and cost, for steel traders, steel fabricators, equipment manufacturers, shipyards and manufacturers of wind power stations. In wind power applications roller conveyor systems are utilised for shot blasting of the steel sheets or plate required for the fabrication of the towers for off-shore and land based windmills.
Typical applications fall into these fabricating industries:
- Steel traders/ distributors
- Steel fabricators
- Equipment manufacturers
- Gas and oil
- Power generation – including wind turbine columns
- Transport – rail, bus, lorry, earthmoving, agricultural
- Steel portal frame, tower block, stadium and steel construction
- Bridge , crane, access, scaffolding and lifting gear
Partners for Steel
There are distinct benefits to be offered by the cooperation between the manufacturers of both shotblast equipment and multispindle drill/saw lines. The objective of cooperation (as partners for steel) is to support customers in resolving the interface problems between the various technologies, integrating shotblasting, measuring, marking, drilling and sawing or punching and shearing or coping and profiling thereby offering customers added value and profit from the processing of steel.
Click here for information on cleanliness standards
Click here for information on surface profile
For further information on roller conveyor shot blast machines please click here
Post written by
Shot Blasting Technical Manager