Tag Archives: Process Optimization

Mass Finishing Success Requires Constant Operational Focus

When most companies take on capital expenditure projects such as purchasing mass finishing equipment, very careful attention is paid to investing in the most productive, cost‐efficient equipment as possible to achieve the best possible quality. Operational efficiency is often another story.

Once the equipment is up and running routine takes over and less attention is paid to keeping the equipment operating at its peak performance. Whether the machinery is never calibrated to reach its fullest potential or the on-going process is not carefully monitored once the process is dialed in, lacking operational focus can be costly and counterproductive. Figuratively speaking, poorly managed mass finishing operations are pouring money down the drain!

Rosler works with its clients to ensure that our machinery delivers initial success and continues to provide precise, repeatable results long into the future by promoting operational attention and heading off costly mistakes.

Consequences of Inattention

For mass finishing processes, the lack of operational focus may take many forms individually or simultaneously, including:

Continue reading Mass Finishing Success Requires Constant Operational Focus

Optimal Media Mix, Part 1 – Identifying and Maintaining Proper Levels

The best mass finishing equipment is useless without the proper media. That’s why the experienced engineers at Rosler Metal Finishing pair their quality equipment with the right type and amount of media to achieve consistent results.

Understanding how your machine, the work pieces it is finishing, and the selected media will interact is key to delivering an optimal finish each cycle. Doing so requires understanding why media levels are important, determining and tracking levels, and evaluating media consumption to avoid issues.

How do Media Levels Effect Processing?

Without a proper media level, a machine won’t work properly. Levels that are too high and too low can cause issues that result in poor processing results and unnecessary workpiece and machine damage.

Continue reading Optimal Media Mix, Part 1 – Identifying and Maintaining Proper Levels

Preventative Maintenance Enables Mass Finishing Equipment to Go the Extra Mile

Mass finishing machines are workhorses of industrial finishing operations, combining engineering expertise and often a hefty price tag. When preformed according to manufacturer recommendations, preventative maintenance can make a big difference in the length of time between design and decommissioning.

Not convinced? Think of your mass finishing equipment like a vehicle. What would happen if you never checked the air pressure in your tires, changed the oil, or replaced the brake pads? Eventually your vehicle would leave you stranded on the side of the road through no fault of its own.

Mass finishing equipment manufactured by a proven expert such as Rosler is just the same as a vehicle that didn’t get the care it deserved. Without preventative maintenance, your high-dollar investment will break down. However, by performing preventative maintenance according to the manufacturer’s recommendations, your equipment will operate like a well-cared for vehicle, extending the life and return on your initial investment.

Diesel or unleaded fuel, anti-lock or drum brakes, manual transmission or automatic, preventative maintenance varies by vehicle type. Here are considerations for preventative maintenance based on your specific mass finishing equipment type.

Read more about preventative maintenance

Optimized Finishing Processes Can Reduce Operational Costs

You don’t throw your media out with the waste water, so why would you purchase new mass finishing equipment or muddle through with an inefficient process when optimization can extend the life and enhance the effectiveness of your processing equipment?

Whether a result of increased production needs or in response to poor performance, optimizing your mass finishing process is a great way to reduce operational costs and lower your equipment’s total cost of ownership.

A Proactive Approach

Revising a process to meet increased production demand is a cost-effective way to not only improve your processing times and results, but also increase and prolong your equipment’s usefulness.

Let’s say production has been steadily building over time. How do you know if it’s time to evaluate the process?

Continue reading Optimized Finishing Processes Can Reduce Operational Costs