Tag Archives: Water Levels

Mass Finishing Process Water, Part 1 – Understand When to Balance Flow or Flood the Process Bowl

Maintaining the correct compound and water flow rate into a mass finishing machine is essential for the stability and success of a process.

If inadequate compound and water are supplied to the machine, results will be more extreme and lead to unpredictable processing times, ineffective finishing, dirty work pieces after finishing, glazed media, and, potentially, a total collapse of the process.

Excessive compound and water flow can be equally problematic. Too much water and compound will slow down the movement of media and work pieces in the machine or cause a complete stop.

For example, in rotary vibrators the typical spiral movement of the media/work piece mix will give way to an uncontrolled shaking. In centrifugal disc machines, the rotating spinner will slip under the media/work piece mix with no movement at all.

Longer processing times, poor finishing results, and even a complete collapse of the process can occur.

For the best results and stability, Rosler understands that the flow rate of compound and water into the machine must be equal to the flow rate out of the machine.

Continue reading Mass Finishing Process Water, Part 1 – Understand When to Balance Flow or Flood the Process Bowl